fabricated structure
英 [ˈfæbrɪkeɪtɪd ˈstrʌktʃə(r)]
美 [ˈfæbrɪkeɪtɪd ˈstrʌktʃər]
装配式结构
双语例句
- Fabricated structure guarantees the inclusion of only the highest integrity materials and enhances maximum possible service life.
组合结构保证了只使用最完美的材料从而最大限度地延长使用寿命。 - In this dissertation, a new kind of thin film manganin gauge was fabricated by adopting new structure, new sensing and packaging materials, and new fabr.
锰铜计是一种特种传感器，主要用于测量冲击波产生的超高压力。 - Application of Dry-hang Stone Material in Fabricated Frame Structure Rebuilding Project
干挂石材在预制框架结构改造工程中的应用 - The organic microcavity light emitting diode was fabricated using structure Glass/ DBR/ ITO/ NPB/ NPB: Alq/ Al. Here NPB and Alq were mixed as the emitting material.
采用结构Glass/DBR/ITO/NPB/NPB∶Alq/Alq/Al制作了有机微腔电致发光器件。 - A new kind of thin film manganin sensor is fabricated by developing structure design, new sensing and packaging materials, and adopting new fabrication technique.
通过传感器的结构设计、敏感材料和封装材料的研制以及采用新的传感器制备工艺，制作了一种新型的薄膜式锰铜传感器。采用熔融石英材料作为绝缘基板。 - The steel plate-polyurethane foam sandwich plate is a new type composite sandwich plate which applied in the fabricated protective structure.
钢板-聚氨酯泡沫夹层板是一种应用于地下防护结构的新型复合材料。 - This technology was applied to ridge waveguide InGaAs/ GaAs/ AlGaAs strained quantum well lasers and fabricated window structure lasers with nonabsorbing mirrors.
并将这两种技术的结合（称为选择区域量子阱无序技术）应用于脊形波导InGaAs／GaAs／AlGaAs应变量子阱激光器，研制出具有无吸收镜面的窗口结构脊形波导量子阱激光器。 - The Study on Mark Slab Advantage of Fabricated Structure Mark Design
装配式结构标志底板优越性浅析 - The amplifiers are fabricated to ridge waveguide structure with 7 ° tilted cavity.
器件制作成脊型波导结构，并采用7°斜腔结构以有效抑制腔面反射。 - However, the fabricated protective structure developed recent years is being applied extensively in the present military, because it is assembled easily, constructed quickly and suited to various geological conditions and climate environment.
而近些年发展起来的装配式防护结构，因其易于安装，施工快捷，适应各种地形条件和气候环境，在现代军事中正得到广泛的应用。 - Engineering application of the joint-arch fabricated shoring structure for deep foundation
深基坑开挖组合支护（连拱式）工程应用 - Organic light-emitting device ( OLED) based on Alq_3 emitting layer, ITO transparent anode and NPB hole transport layer were fabricated. The structure was ITO/ NPB/ Alq_3/ LiF/ Al.
以ITO为透明电极，NPB为空穴传输层，Alq3为发光层，制备出ITO/NPB/Alq3/LiF/Al结构的有机电致发光显示器。 - A buffer for protection from bumping in chemical reactions heated with microwave radiation was fabricated and its structure, working principle and method of manipulation were described.
介绍了一种适用于微波化学反应器的防爆喷缓冲装置的结构、工作原理和使用方法。 - A new structure with ⅱ-ⅵ nano-crystal ZnO film as the electron transport layer and MEH-PPV as the hole transport layer and emitting layer was fabricated. The new structure's brightness and efficiency were improved markedly compared with that of the single MEH-PPV layer structure.
以ⅡⅥ族无机半导体ZnO纳米颗粒为电子传输层，MEHPPV为空穴传输层兼发光层，得到的电致发光器件比单层MEHPPV器件的发光亮度和效率都明显提高。 - Based on a new type of fabricated protective structure, the base members of protective structure which are steel plate-polyurethane foam sandwich plates are studied in the thesis though the test.
本文结合一种新型装配式防护结构的研制工作，对该防护结构的基本构件钢板&聚氨酯泡沫夹层板进行了试验研究。 - For instance, the development of aluminium alloy glass curtain wall has been brought forth with the following performances such as: 1, the metallic frame structure system has been developed into an unit of fabricated structure;
铝合金玻璃幕墙的发展主要体现在以下方面：金属框架结构体系发展为单元组合装配式结构； - Study and spread of fabricated structure technique in irrigation and drainage engineering
农田水利装配式建筑物技术研究与推广 - The microwave bulk acoustic delay lines with centre frequency of 8 GHz were fabricated using a multilayer structure consisting of alternative half wave thick layer of ZnO films with different electro mechanical coupling factors.
用具有不同机电耦合系数、厚度为半波长的交替排列多层氧化锌薄膜制成了中心频率为8GHz的声体波微波延迟线。 - A narrow linewidth single polarized all fiber ring laser has been fabricated. The structure and the technical parameters are presented.
研制出一种新颖的窄线宽、单偏振输出全光纤环形激光器，并给出了这种激光器的结构和技术性能参数。 - The material structure was grown on ( 001) semi-induction InP wafer by molecular beam epitaxy, and the device was fabricated with a mesa structure.
结构材料由分子束外延制备，衬底片为（001）半绝缘InP单晶片，器件制作选用台面结构。 - Results show that, the surface micro-machined structure has good thermal isolation and temperature uniformity in vacuum, excellent mechanical strength and good IC process compatibility, which make it better match the requirements of microcalorimeters than the bulk silicon fabricated structure.
结果表明，表面加工型结构在真空中绝热性能优良、样品区温度分布较均匀，同时，它机械强度高、与IC工艺兼容性好，比体硅加工结构更符合微量热计的需要。 - As the role of the pre-stressing force which between the components has greatly improved the integrity of fabricated structures, the structure overcome the poor reliability of the fabricated structure connected nodes.
由于构件连接预应力的作用，大大提高了装配式结构的整体性，克服了装配式结构节点连接可靠性差的缺点。 - One of the effective ways for lowing internal resistance of cell is that the electrolyte is fabricated into membranes in structure.
减少电池内阻的最有效途径之一就是在结构上将电解质制成薄膜。 - In recent years, with the emergence and development of cold-formed thin-wall steel dwelling houses, integrated fabricated thin-walled light steel structure system has been widely used.
随着近几年冷弯薄壁型钢住宅结构的出现及推广，集成装配式薄壁轻钢结构体系得到广泛的应用。 - Article reference extensive literature and construction practice, this paper introduces the industrialization fabricated substation steel structure building construction and installation technologies of buildings, fabricated in cable trench, partition wall and modular electrical construction technology.
文章参考大量的文献及施工实际，介绍了工业化装配式变电站钢结构建筑物施工吊装技术，对建筑物、装配式电缆沟、围墙及模块化电气施工技术。 - For the concrete composite structure was made by pouring concrete on prefabricated components to form fabricated structure, it had both advantages-convenient construction, short construction period of prefabricated structure and good entirety, seismic performance of cast-in-situ structure.
由于混凝土叠合结构是在预制构件上再次现浇一层混凝土而形成的装配式结构，故其兼具预制结构施工方便、缩短工期和现浇结构整体性能、抗震性能好等的优点。 - Fabricated large panel structure as a kind of building structure has its unique advantages, at the same time its shortcomings are also obvious.
装配式大板结构作为一种独特的建筑结构，有着其独有的优点，同时，其缺点也非常明显。 - Pre-stressing concrete fabricated structure is formed by applying concrete components with pre-stressing force.
预压装配式结构是将混凝土构件通过施加预应力装配而成。 - As the reliability of the fabricated structure node connection is poor, it is difficult to meet the requirement under repeated loading force.
由于装配式结构节点连接可靠性差，难以满足反复荷载下的受力要求。